What should I do if my e-bike display is not responding to button presses?

If your e-bike display is unresponsive to button presses, you can try the following troubleshooting steps:

1. Ensure that the display is properly connected to the e-bike's control system. Check the cables and connectors for any signs of damage or loose connections. Reconnect them securely if necessary.

2. Check the battery level of your e-bike. If it's low, charge the battery fully and retry using the display.

3. Verify that the display is receiving power. Confirm that the power switch or button is in the "on" position and that the battery is switched on, if applicable.

4. Check for any error messages or indicator lights on the display. Consult the user manual or contact customer service if you encounter any specific error codes.

5. Restart the e-bike system. Turn off the e-bike, disconnect the battery (if possible), wait for a few seconds, reconnect the battery, and power on the system again.

6. If none of the above steps work, try a factory reset of the display as a last resort. Refer to the user manual or contact customer service for instructions on how to perform a reset.

If the problem persists, it may require professional assistance from the customer service.